Arduino Sensor Board plus PongClock
This tiny sensor board was solely designed by Mike Rankin, a friend that help me to bring life to a real custom GPS board. This time he was looking for a multi purpose board to develop anything.
Sensor Board Main display Side Showing Ponglock
Feature list:
- I2C Bus to save pins for future use.
- 128×64 OLED I2C Display: let’s draw anything
- Momentary switch on left and cross plus center buttons on right (total 6 input buttons)
- Arduino Leonardo based: USB for anything.
- Temperature sensor (I2C)
- Barometer sensor (I2C)
- Accelerometer sensor (I2C)
- Real Time Clock (I2C) plus backup battery.
- Switched power supply.
- LiPo charger.
- Tiny design: let’s make portable projects.
Sensor Board Main Component Side
I couldn’t resist temptation.. I ported the pongclock code from Rob Parrett to this tiny board. Here is the result:
Hardware is open hardware, you can obtain anything on Mike’s web or you can buy it directly from Tindie. Custom pongclock code can be downloaded from here.
Update: I fixed 3 bugs in the original code to fix pong game behavior to be as accurate as possible, like the scoreboard, ball missing and properly change of hours.